Decal Requirements

Mandatory and suggested decals are shipped with every new license.  

• Replacements can be ordered via the National BMW CCA Store.
• Charges for replacement decals may apply.

Mandatory Decals

Series Tire Rack Windshield Banner – one required CRS Sponsor Bimmerworld Two Required – one on each side Premier VAC Two Required – one on each side Sunoco Two Required – one on each side FCP Euro Two Required – one on each side Associate Grassroots Motorsports Two Required – one on each side Lockton Affinity None Official Supplier HMS Two Required – one on each side Optima Two Required – one on each side MCS Two Required – one on each side PFC Two Required – one on each side Red Line Two Required – one on each side Spec E36 & E46 Toyo Four Required for Spec E36 & E46 only – Front, rear and one on each side

 

Decal Application:

Here are a few hints that should make the process go smoothly and provide outstanding results:

1. Don’t apply decals at the track.
2. Take your time.
3. Patience will be required and on larger decals it is easier if two people work together.
4. Plan where the decal will be placed. A plumb line works well to create a vertical reference to keep it squarely aligned.
5. Clean the car surface and apply wax where the decal will go.
6. Spray the car surface with a soapy water solution. This will allow you to position the decal. Note: Spraying the back of the decal itself is an alternative that will keep it from sticking together.
7. Lay the decal on the car surface until positioned exactly where you want it.
8. Use a plastic card (credit cards work well) to squeegee out the soapy water solution from under the decal while smoothing it and removing air bubbles.
9. Let it dry overnight.
10. Sit back and enjoy your accomplishment!