GVC Logo

Decal Requirements

Mandatory and suggested decals are shipped with every new license.  

 
Decal requirements updated effective 7/21/2017 
Mandatory Decals
Series Tire Rack Windshield Banner - one required
CRS Sponsor Bimmerworld Two Required - one on each side
Premier VAC Two Required - one on each side
  Sunoco Two Required - one on each side
  FCP Euro Two Required - one on each side
Associate

  Grassroots Motorsports     Two Required - one on each side
  Lockton Affinity None
Official Supplier HMS Two Required - one on each side
  Optima Two Required - one on each side
  MCS Two Required - one on each side
  PFC Two Required - one on each side
  Red Line Two Required - one on each side
Spec E36 Series     H&R Two Required for Spec E36 series only - one on each side

Decal Application:

Click here for a useful guide to help apply your decals (.pdf)

Here are a few hints that should make the process go smoothly and provide outstanding results:

1. Don't apply decals at the track.
2. Take your time.
3. Patience will be required and on larger decals it is easier if two people work together.
4. Plan where the decal will be placed. A plumb line works well to create a vertical reference to keep it squarely aligned.
5. Clean the car surface and apply wax where the decal will go.
6. Spray the car surface with a soapy water solution. This will allow you to position the decal. Note: Spraying the back of the decal itself is an alternative that will keep it from sticking together.
7. Lay the decal on the car surface until positioned exactly where you want it.
8. Use a plastic card (credit cards work well) to squeegee out the soapy water solution from under the decal while smoothing it and removing air bubbles.
9. Let it dry overnight.
10. Sit back and enjoy your accomplishment!